Anyone have a source for a through hole. (panel mount) rotor encoder?
I am looking for 2 of them that have a min 20 pulses per rev with no detents.
Also, how hard is it to use flowcode with a graphical LCD ? I have used the character types but not the graphical ones.
Bob
rotory or quadrature encoders
Moderator: Benj
- JohnCrow
- Valued Contributor
- Posts: 1367
- Joined: Wed Sep 19, 2007 1:21 pm
- Location: Lincolnshire
- Has thanked: 364 times
- Been thanked: 716 times
- Contact:
Re: rotory or quadrature encoders
Hi Bob
Not sure where you would get one in the states
Possibly mouser or I think farnell have a distributor in the states.
The EB057 display has a macro in flowcode 4 or 5
Fairly easy to use have a look at the matrix demo file. I can upload a simple program later when I get home if you still are looking.
Not sure where you would get one in the states
Possibly mouser or I think farnell have a distributor in the states.
The EB057 display has a macro in flowcode 4 or 5
Fairly easy to use have a look at the matrix demo file. I can upload a simple program later when I get home if you still are looking.
1 in 10 people understand binary, the other one doesn't !
-
- Posts: 157
- Joined: Sat Jan 22, 2011 10:39 pm
- Location: Michigan
- Has thanked: 6 times
- Been thanked: 27 times
- Contact:
Re: rotory or quadrature encoders
John,
I have been looking at Mouser, have their printed catalog right here. Still gathering ideas and parts for my next project.
Trying to get my FC home upgraded to Pro at the moment.
Will have to look into the Graphical LCD, would make things really look nice compared to a 4x20 display.
I have been looking at Mouser, have their printed catalog right here. Still gathering ideas and parts for my next project.
Trying to get my FC home upgraded to Pro at the moment.
Will have to look into the Graphical LCD, would make things really look nice compared to a 4x20 display.
- JohnCrow
- Valued Contributor
- Posts: 1367
- Joined: Wed Sep 19, 2007 1:21 pm
- Location: Lincolnshire
- Has thanked: 364 times
- Been thanked: 716 times
- Contact:
Re: rotory or quadrature encoders
Hi Bob
Ive attached a example using the EB057
This shows the 8 channels from a TPA81 thermopile as a simple line graph
The device is read by the I2C bus
Ive attached a example using the EB057
This shows the 8 channels from a TPA81 thermopile as a simple line graph
The device is read by the I2C bus
1 in 10 people understand binary, the other one doesn't !