18F67k22

[saschech@gmx.de]

Hello Team

I have different problem`s with these chip (also with the beta) !
At what time i can hope for a solution?

Regards Wolfgang

[Benj]

Hello Wolfgang,

What is the problem you are having?

[saschech@gmx.de]

Hello Benj

I cant set config-bits and speed,show screen-shot`s

Regards Wolfgang

[saschech@gmx.de]

Hello Benj

If i want compile....

Regards Wolfgang

[Benj]

Hi Wolfgang,

The first screenshot shows a 18F45K20, is this correct?

As for the configuration problems here is an updated set of configuration files for PPP that should allow this device to work correctly.

You will need to extract the files from the archive and then copy into your "Flowcode v4/Tools/PPP" directory.

[saschech@gmx.de]

Hello Benj

The 18F45K20 can work with 64MHZ.....

set the config bits , work with the new ppp ok,
but compile to hex,i have the same error.

Regards Wolfgang

[Benj]

The 18F45K20 can work with 64MHZ.....

OK these definitions have now been fixed and will be included in the update.

set the config bits , work with the new ppp ok,

Great thanks for letting me know.

but compile to hex,i have the same error.

I will see if I can get this fixed for you also.

[Benj]

Here is an updated FCD for the 18F45k20 device.

[saschech@gmx.de]

Hello Benj

Thank you for effort,but the file is for 18F45k20;
must i rename the file to 18f67k22 ; because i have compile rerror with this chip?

Regards Wolfgang

[Benj]

Hello Wolfgang,

Please try this FCD and ADC24 component C file and let me know how you get on.

I sent the other FCD because I got a PM from David saying you had requested this updated FCD.

[saschech@gmx.de]

Hello Benj

I changing files without succsess.

Regards Wolfgang

[Benj]

Hi Wolfgang,

I noticed this in your command line parameters.

_ecio40pin

This should not be there!

Please can you go into the Chip -> Compiler options menu and click restore defaults and then see if this text is still present in your output window.

If you could upload your file to the forums then I will see if I can replicate your problem here.

[saschech@gmx.de]

Hello Benj

I name my project _ecio40pinxxxxx because my print is the identical construction with the 18F67k22.

Your tip "take default`s" dos not fix the error.

So i start new with input macros....after a 2 adc i have the error ; the thame after i put in a pwm macro

Regards Wolfgang

[saschech@gmx.de]

Hello Team

What can i do fix the error`s ? ; Because I cant go on with my project!

Regards Wolfgang

[Benj]

Hi Wolfgang,

The ADC is compiling correctly for us here on the new version using the files I previously attached so it must be a problem with the beta release of the compiler. We are in the process of testing the 4.5 release now so hopefully we will have something to fix your problem very shortly.