MATRIX MIAC Programmer SW

For MIAC users to discuss projects, applications, and any other issues related to the MIAC unit.

Moderators: Benj, Mods

Post Reply
User avatar
QMESAR
Valued Contributor
Valued Contributor
Posts: 1287
Joined: Sun Oct 05, 2014 3:20 pm
Location: Russia
Has thanked: 384 times
Been thanked: 614 times
Contact:

MATRIX MIAC Programmer SW

Post by QMESAR »

Hi Team.
I am having an issue with programming a MIAC in the field far away from me :D
The MIAC Connects to the programmer load the hex file(which programs perfectly out of FC7 and FC8) then starting to program but then an error regarding the eeprom is made and the programming stops with the progress bar at the position as you see in the attached ,
What are we doing wrong ? On the other side it says sending completed I am not sure now is the MIAC programmed or not, as it is connected to a very expensive Test rig, I am afraid to start the system not knowing the MIAC is programmed Correctly
Please help :oops:
1.jpg
1.jpg (28.97 KiB) Viewed 6149 times

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: MATRIX MIAC Programmer SW

Post by Benj »

Hi Peter

Can you try using mloader instead. Hopefully that should work correctly.

We switched the chip in the miac for a bigger rom size and the old software probably doesn't like big hex files.

User avatar
QMESAR
Valued Contributor
Valued Contributor
Posts: 1287
Joined: Sun Oct 05, 2014 3:20 pm
Location: Russia
Has thanked: 384 times
Been thanked: 614 times
Contact:

Re: MATRIX MIAC Programmer SW

Post by QMESAR »

Hi Ben,
Thank you for your info,I will try this today

User avatar
QMESAR
Valued Contributor
Valued Contributor
Posts: 1287
Joined: Sun Oct 05, 2014 3:20 pm
Location: Russia
Has thanked: 384 times
Been thanked: 614 times
Contact:

Re: MATRIX MIAC Programmer SW

Post by QMESAR »

Hi Ben.

Thank You M-Loader worked for me in my lab however I have both the EB006V9 and the MIAC USB drivers installed and at my customer only the MIAC USB driver is installed ,which Driver M-loader is using to connect to the MIAC.? :shock: I guess I am asking what driver to supply with M-Loader to the Customer.

Have good time

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: MATRIX MIAC Programmer SW

Post by Benj »

Hi Peter

It's just the MIAC USB driver that you need for it to work with mLoader.

User avatar
QMESAR
Valued Contributor
Valued Contributor
Posts: 1287
Joined: Sun Oct 05, 2014 3:20 pm
Location: Russia
Has thanked: 384 times
Been thanked: 614 times
Contact:

Re: MATRIX MIAC Programmer SW

Post by QMESAR »

Hi Ben.
Thank you very much ,understood this should be ok as they have the MIAC driver installed :D :D

Post Reply