I am looking to simply use the I/O ports on the serial expansion to send 5v signals to some relay boards I have, to control some external components. I can't find any flowcode that will allow me to just turn the output on in the same way as I can use the component macro for the MIAC - OutputON - can anyone point me in the direction of the correct help file or a way of doing this? The help files I have read so far seem to suggest that you have to use the flowcode outputs etc. but there don't seem to be any simple outputON codes...
Thanks for any help
Alan
MIAC Serial Expansion I/O usage
-
- Posts: 2
- Joined: Tue Dec 17, 2013 6:52 pm
- Been thanked: 1 time
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: MIAC Serial Expansion I/O usage
Hello Alan,
Ok for your program to work correctly select the MIAC system as your target device, then add the MIAC and the Serial Expansion components to your panel. Next add a LED component for an output or a switch for an input, edit the connections and you should be able to assign them to the MIAC serial module. The Component macros will then work to switch the external port pin on and off.
Ok for your program to work correctly select the MIAC system as your target device, then add the MIAC and the Serial Expansion components to your panel. Next add a LED component for an output or a switch for an input, edit the connections and you should be able to assign them to the MIAC serial module. The Component macros will then work to switch the external port pin on and off.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 2
- Joined: Tue Dec 17, 2013 6:52 pm
- Been thanked: 1 time
- Contact:
Re: MIAC Serial Expansion I/O usage
Many thanks - I got this to work but haven't had a chance to come back since to say thank you!