Hi.
IΒ΄m newbie and trying to learn to use flowcode. (Version 3 pro purchased from ELEKTOR).
IΒ΄m a littel bit confused, by some of the tutorials, cause the simulation does not work as expected.
Example: When iΒ΄m trying to run tutorial 34 (TUT_34), the display show 37+21 = 0 and 37 - 21 = 0 - when i run the simulation.
If i make the circuit with e-bloks, and program the microcontroller, the programs works ok and the display shows the right information.
Why does some of the tutorials not works properly when the programs are simulated ?. Am i doing somethinh wrong ?.
Tutorail 34 bugs ?
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Tutorail 34 bugs ?
Hello
Tutorial 34 is a C code demo to demostrate how to use C code in your programs.
The simulation does not work because Flowcode cannot simulate raw C code.
Tutorial 34 is a C code demo to demostrate how to use C code in your programs.
The simulation does not work because Flowcode cannot simulate raw C code.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel