Tutorail 34 bugs ?

Forum for problems or queries regarding the Flowcode application and compiler usage.

Moderators: Benj, Mods

Post Reply
canielsen
Posts: 6
Joined: Sat Oct 17, 2009 10:35 pm
Contact:

Tutorail 34 bugs ?

Post by canielsen »

Hi.

IΒ΄m newbie and trying to learn to use flowcode. (Version 3 pro purchased from ELEKTOR).
IΒ΄m a littel bit confused, by some of the tutorials, cause the simulation does not work as expected.
Example: When iΒ΄m trying to run tutorial 34 (TUT_34), the display show 37+21 = 0 and 37 - 21 = 0 - when i run the simulation.

If i make the circuit with e-bloks, and program the microcontroller, the programs works ok and the display shows the right information.

Why does some of the tutorials not works properly when the programs are simulated ?. Am i doing somethinh wrong ?.

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: Tutorail 34 bugs ?

Post by Benj »

Hello

Tutorial 34 is a C code demo to demostrate how to use C code in your programs.

The simulation does not work because Flowcode cannot simulate raw C code.

canielsen
Posts: 6
Joined: Sat Oct 17, 2009 10:35 pm
Contact:

Re: Tutorail 34 bugs ?

Post by canielsen »

Thank you very much.

Post Reply