Hello,
Why is a PIC12F510 offered as a target in V3, but not supported under configuration?
Regards,
Mike
Flowcode V3 & PIC12F510
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Flowcode V3 & PIC12F510
Hello Mike
Which version of Flowcode are you using? As far as im aware the 12F510 device was removed from Flowcode a long time ago. BoostC has even dropped it from its supported device list.
Which version of Flowcode are you using? As far as im aware the 12F510 device was removed from Flowcode a long time ago. BoostC has even dropped it from its supported device list.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: Flowcode V3 & PIC12F510
Hi Benj,
As I stated earlier...(twice)- V3 is the version.
It is still listed as a possible target.
Regards,
Mike
As I stated earlier...(twice)- V3 is the version.
It is still listed as a possible target.
Regards,
Mike
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Flowcode V3 & PIC12F510
Hello Mike
Sorry which version of V3. Eg 3.0, 3.1, 3.4, 3.6, etc.
V3.6 can be downloaded from here if you are using an older version.
http://www.matrixmultimedia.com/Flowcode3a-X.php
Sorry which version of V3. Eg 3.0, 3.1, 3.4, 3.6, etc.
V3.6 can be downloaded from here if you are using an older version.
http://www.matrixmultimedia.com/Flowcode3a-X.php
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel