Hi Everyone,
I have just brought a 64 x 100 px LCD that comes with an LM4064 driver. The connection to the micro controller is either serial or parallel.
If serial you need these connections.
/WR
RD
A0
CS2
RES
SCL
SI
Vdd
Vss
Is it possible to hook this display up to the flowcode using the gLCD macro? I'm on a PIC16F887.
Thanks
Thom
gLCD 64 x 100 px
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: gLCD 64 x 100 px
Hello,
It would be possible to hook up the device by tailoring one of the beta LCD drivers for use with this LCD. I have not come across the controller chip you mentioned but it might be worth while checking if there is a compatible controller that has already been created by us.
It would be possible to hook up the device by tailoring one of the beta LCD drivers for use with this LCD. I have not come across the controller chip you mentioned but it might be worth while checking if there is a compatible controller that has already been created by us.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel