I have a strange problem when i place an output on the panel.
As soon as i replace it, the output (LED, RGBLED and LED array), the LED and the activation field are split!. So when i want to change fi the connection, right clicking the LED does not work, because the corresponding area is somewhere else. I can only find it by randomly clicking in the panel. This is very annoying. What can be the cause and remedy ?
Outputs in panel
-
- Flowcode v5 User
- Posts: 211
- Joined: Tue Feb 19, 2013 9:51 pm
- Has thanked: 72 times
- Been thanked: 177 times
- Contact:
Re: Outputs in panel
I just did a search for "panel bug" and this post was listed which looks similar to your issue:
http://www.matrixmultimedia.com/mmforum ... bug#p24031
It is for V4 and no remedy but, the last entry has an easy work around. Give it a try, hit run then stop.
You could also download the V5 Demo and use it to see if the problem follows.
http://www.matrixmultimedia.com/mmforum ... bug#p24031
It is for V4 and no remedy but, the last entry has an easy work around. Give it a try, hit run then stop.
You could also download the V5 Demo and use it to see if the problem follows.
Re: Outputs in panel
I downloaded FC5 to a new directory, but the phenomen remains. It only affects the LED icons !
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Outputs in panel
Hello,
Sounds like an interesting phenomenon, certainly nothing I've ever experienced.
Out of interest what is your windows DPI set to?
Sounds like an interesting phenomenon, certainly nothing I've ever experienced.
Out of interest what is your windows DPI set to?
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: Outputs in panel
Hi,
Refering to the LED problem, i found a workaround to correct the strange behaviour. When i place an LED on the panel, i change the external properties from round to square or oval, and then back to round. After that i can move the LED over the panel whitout the LED and selection frame being split. Some hint to a solution ?
Refering to the LED problem, i found a workaround to correct the strange behaviour. When i place an LED on the panel, i change the external properties from round to square or oval, and then back to round. After that i can move the LED over the panel whitout the LED and selection frame being split. Some hint to a solution ?