Page 1 of 1
BackPlane.
Posted: Tue Sep 28, 2010 2:55 pm
by KeithSloan
As the Backplane is metal should one use stand off's to avoid shorts?
Please remind me of the spacing and hole diameter.
I tried downloading the pdf file, but the link was broken.
Thanks
Re: BackPlane.
Posted: Tue Sep 28, 2010 3:40 pm
by Benj
Hello,
The E-blocks boards should come complete with rubber feet so there should be no chance of shorts against the metal backplane.
The hole spacing is on a 20mm pitch.
I'll see if I can remedy the datasheet link for the backplane.
Re: BackPlane.
Posted: Tue Jan 11, 2011 9:38 pm
by KeithSloan
Out of Interest how thick is the backplane BP232?
The datasheet link still appears to be broken.
Re: BackPlane.
Posted: Mon Feb 21, 2011 1:58 pm
by Benj
Hello,
Looks like the backplane thickness is about 1.5 - 1.6mm. Ill send a request to the Marketing team to get the data sheet sorted.