Plugging multiple eblock modules into a Eblock2 board

For E-blocks user to discuss using E-blocks and programming for them.

Moderators: Benj, Mods

Post Reply
beneee
Posts: 37
Joined: Tue May 14, 2013 8:18 pm
Has thanked: 6 times
Been thanked: 1 time
Contact:

Plugging multiple eblock modules into a Eblock2 board

Post by beneee »

Hi all,

Having a bit of an issue, i have been using my old eblocks EB006 for years and invested a lot of money in the boards, I recently discovered that it cannot program the newer pics (16F18877) which is fair enough as it is old so i have bought a new programmer BL0080 and 5 adaptor boards BL0119 so i can use my old boards.

I have just received these only to discover the board has been laid out in such a way that you cannot use the adaptor boards in adjoining ports, why would you do that, why is there not a warning on your website and do you have a workaround as I cannot see any extension cables on your shop.

More than slightly miffed and itching to continue with my project.
Ben
IMG_20200405_111311b.jpg
IMG_20200405_111311b.jpg (172.35 KiB) Viewed 4490 times

medelec35
Matrix Staff
Posts: 9520
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2585 times
Been thanked: 3815 times
Contact:

Re: Plugging multiple eblock modules into a Eblock2 board

Post by medelec35 »

What about using a BL0156 Splitter board?
BL0156 Splitter Board.png
(55.79 KiB) Downloaded 632 times
Martin

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: Plugging multiple eblock modules into a Eblock2 board

Post by Benj »

Hello,

Sorry to hear of the problems you are having. We took a lot of time deciding on the new layout for the EB2 boards and there was always going to be downsides with reducing the size but it needed to happen.

I would recommend IDC type extension cables, either via Matrix or you can buy and make your own.

http://www.matrixtsl.com/webshop/e-bloc ... cable.html

https://www.rapidonline.com/Catalogue/S ... [%229%22]}

https://uk.farnell.com/w/c/connectors/d ... cts&st=IDC

beneee
Posts: 37
Joined: Tue May 14, 2013 8:18 pm
Has thanked: 6 times
Been thanked: 1 time
Contact:

Re: Plugging multiple eblock modules into a Eblock2 board

Post by beneee »

Hi Benj,

IDC cables would be an option and i have some but that isn't the problem, i can't actually plug two of the BL0119 modules in to the BL0080 board side by side as the spacing is 3mm too short!
Do you sell/supply the Harting connector that eblocks2 boards use made up into a short cable so i can move the boards away a bit.
https://b2b.harting.com/ebusiness/en/ha ... 0162601333

Thanks
Ben
IMG_20200405_171521.jpg
IMG_20200405_171521.jpg (70.45 KiB) Viewed 4473 times

Post Reply