Hi,
I have a problem with CAN Bus from E-blocks 2.
There is no component CAN Bus BL0140 (E-blocks2) in FlowCode 8. The macros of compo
Is it possible to release an update with this component?
Thanks in advance for your help.
E-blocks 2 CAN Bus (BL0140)
-
- Posts: 26
- Joined: Tue Sep 18, 2018 5:22 pm
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: E-blocks 2 CAN Bus (BL0140)
Hello,
No I have not created an E-blocks specific component for the BL0140 CAN board yet.
For now you can use the CAN component available from the Comms component category to drive the board.
No I have not created an E-blocks specific component for the BL0140 CAN board yet.
For now you can use the CAN component available from the Comms component category to drive the board.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 26
- Joined: Tue Sep 18, 2018 5:22 pm
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
Re: E-blocks 2 CAN Bus (BL0140)
Hello,
I have a CAN Bus Board BL0140 from Eblocks2 and a small program using CAN(Internal, MCP2515) component macros, which I took from Comms.
A component is initialized in the program, and since the initialization macro does not return anything, I check in another way work it or not. After initialization, leds on CAn Bus Board should be lit one by one, then values from the switches are read and displayed on the screen.
Leds do not shine, values are not read.
Could you tell me what I'm doing wrong? Thanks.
I have a CAN Bus Board BL0140 from Eblocks2 and a small program using CAN(Internal, MCP2515) component macros, which I took from Comms.
A component is initialized in the program, and since the initialization macro does not return anything, I check in another way work it or not. After initialization, leds on CAn Bus Board should be lit one by one, then values from the switches are read and displayed on the screen.
Leds do not shine, values are not read.
Could you tell me what I'm doing wrong? Thanks.
- Attachments
-
- CANtest.fcfx
- (14.42 KiB) Downloaded 296 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: E-blocks 2 CAN Bus (BL0140)
Hello,
I'm afraid that the LEDs on the board are only available when using the external CAN bus transceiver as they are connected to it's I/O pins.
I'm afraid that the LEDs on the board are only available when using the external CAN bus transceiver as they are connected to it's I/O pins.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel