Hi all.
I’m using the Arduino E-blocks shield and development board with the E-blocks Sensors Bundle. Am I right in assuming the EB090 sensor motherboard requires power (5V || 3.3V) in order to work and work with any of the sensors such as the digital temperature sensor board, for example?
Many thanks.
EB090 Help
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: EB090 Help
Hi,
Yes, it needs processor voltage (3v3 or 5v) connected to V+
Also for some sensors, such as Colour sensor and Ultrasonic sensor, it also needs (9v) to Vpwr
Leigh
ps. Datasheet can be found here ...
https://www.matrixtsl.com/resources/fil ... asheet.pdf
Yes, it needs processor voltage (3v3 or 5v) connected to V+
Also for some sensors, such as Colour sensor and Ultrasonic sensor, it also needs (9v) to Vpwr
Leigh
ps. Datasheet can be found here ...
https://www.matrixtsl.com/resources/fil ... asheet.pdf