Hi there,
I try to use a EB072 ZIF add-on board on the EB-006-00-7 PIC programmer.
The program doesn't run with the add-on.
When I remove the EB072, the program runs well.
Is the EB072 only compatible with some other EB006 versions?
Please let me know.
Rinie
EB072 problems
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: EB072 problems
Hello Rinie,
The EB072 board is designed to allow for reprogramming only for easy insertion when programming chips to run on 3rd party hardware. It does not provide access to the port pins to allow the PIC microcontroller to run a program.
The EB072 board is designed to allow for reprogramming only for easy insertion when programming chips to run on 3rd party hardware. It does not provide access to the port pins to allow the PIC microcontroller to run a program.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Flowcode v5 User
- Posts: 68
- Joined: Thu Mar 01, 2007 10:48 am
- Location: Netherlands
- Been thanked: 3 times
- Contact:
Re: EB072 problems
Hello Benj.
Thanks for your reply, I should have looked at the datasheet first.
That shows the EB072 is for programming only.
I have ordered some ZIF sockets for the other EB006 boards.
Rinie
Thanks for your reply, I should have looked at the datasheet first.
That shows the EB072 is for programming only.
I have ordered some ZIF sockets for the other EB006 boards.
Rinie
Greetings, Rinie
Flowcode V7 user
Flowcode V7 user