Formula Flowcode and the Bluetooth board

For Formula Flowcode Micromouse users to discuss projects, flowcharts, and any other issues related to the Formula Flowcode Micromouse.

Moderator: Benj

Post Reply
marcbernz
Posts: 20
Joined: Thu Nov 28, 2013 5:04 pm
Has thanked: 5 times
Contact:

Formula Flowcode and the Bluetooth board

Post by marcbernz »

Hi,

I have searched this youtube video and I just want to ask anyone know how are the eblocks connected and what ports are used.

http://www.youtube.com/watch?v=Fp0sUC9EoQw

I also want to ask, if I want to use a laptop as a controller for the buggy, is there any application that I can install or make?

Thanks,

Marc Bernz

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: Formula Flowcode and the Bluetooth board

Post by Benj »

Hello Marc,

Bluetooth board EB024 connected to D-Type connector on Formula Flowcode which maps to the PORTD pins 0-7.

If your connecting via Bluetooth then the Free Flowcode v6 simulation might be a good way of controlling the robot as you can create switches etc or use key mappings to translate keyboard pressed into commands for the formula flowcode.

marcbernz
Posts: 20
Joined: Thu Nov 28, 2013 5:04 pm
Has thanked: 5 times
Contact:

Re: Formula Flowcode and the Bluetooth board

Post by marcbernz »

Thanks Benj,

Which interfaces should I connect from the EB024 to the Buggy?

Post Reply