Search found 301 matches
- Tue Mar 16, 2021 4:18 am
- Forum: Flowcode V8
- Topic: Replacing a Component
- Replies: 4
- Views: 2101
Re: Replacing a Component
Hello! Ben good morning Kindly correct me if i do not understand, did you prompt me to read something "here"? I detail the Selection -> Replace functionality here. Unfortunately i do not see the "Replace" option elsewhere but only after right clicking the component in the 2D dashboard. i tried to ad...
- Mon Mar 15, 2021 4:37 pm
- Forum: Flowcode V8
- Topic: Replacing a Component
- Replies: 4
- Views: 2101
Replacing a Component
Hello! I am trying to replace one component "gLCD_SSD1306_i2c1" with "gLCD_SH1106_I2C1" first of all is that possible and will this type of action change or migrate to the new component and all of its MACROS, i tried doing that but on right clicking the SH1106 and trying to replace nothing is shown,...
- Sat Feb 20, 2021 8:20 am
- Forum: Flowcode V8
- Topic: EEPROM on 18F27J13
- Replies: 3
- Views: 1892
Re: EEPROM on 18F27J13
Hello! Ian
If i have not mistaken this chip (PIC18F27J13) do not have onboard EEPROM.
Abhi
If i have not mistaken this chip (PIC18F27J13) do not have onboard EEPROM.
Abhi
- Wed Feb 03, 2021 3:47 pm
- Forum: General Programming
- Topic: how to set or clear individual bits in a veriable??
- Replies: 3
- Views: 4807
Re: how to set or clear individual bits in a veriable??
Hello! Martin
Wonderful explanation, thank you.
Abhi
Wonderful explanation, thank you.
Abhi
- Sat Jan 30, 2021 7:35 am
- Forum: Flowcode V8
- Topic: PIC18F26K42 and UART
- Replies: 9
- Views: 6066
Re: PIC18F26K42 and UART
Hurray! Peter
This is indeed a very good news, i am happy to see this components in FC, i think it was really missing, mean time can you help me, which chips are you planning for, so i will order a couple of each till the time you get ready.
Thank you again, hear you soon.
Abhi
This is indeed a very good news, i am happy to see this components in FC, i think it was really missing, mean time can you help me, which chips are you planning for, so i will order a couple of each till the time you get ready.
Thank you again, hear you soon.
Abhi
- Thu Jan 28, 2021 1:08 pm
- Forum: User Components
- Topic: Map Function for any target device.
- Replies: 21
- Views: 10013
Re: Map Function for any target device.
Hello! Martin
good afternoon
FC Wiki, no exaggeration, you understand exactly what is the problem and its solution, many many thanks for the below post, thanks to @Jan Lichtenbelt too for that detailed study, so many things to learn.
Abhi
good afternoon
FC Wiki, no exaggeration, you understand exactly what is the problem and its solution, many many thanks for the below post, thanks to @Jan Lichtenbelt too for that detailed study, so many things to learn.
Abhi
- Thu Jan 28, 2021 1:02 pm
- Forum: Flowcode V8
- Topic: PIC18F26K42 and UART
- Replies: 9
- Views: 6066
Re: PIC18F26K42 and UART
Hi! Ben good afternoon No no Ben its okay, i know you are a busy person, but i wanted to hear that straight from the "Horses Mouth". Fortunately @Chipfryer27 and his MCP3201 chart helped me a lot with 12bit ADC (honestly Ben, try to launch this ADC component series if possible, it is missing in FC) ...
- Wed Jan 27, 2021 4:55 pm
- Forum: User Components
- Topic: Map Function for any target device.
- Replies: 21
- Views: 10013
Re: Map Function for any target device.
Hello! Martin good evening Once again thanks for this post, it works wonderful, cheers... May i request you to help me understand is it possible to add the function like "GetAverageInt" effect from ADC component for the output of the Map Function to stabilize the reading, actually i am using the MCP...
- Tue Jan 26, 2021 1:53 pm
- Forum: Flowcode V8
- Topic: PIC18F26K42 and UART
- Replies: 9
- Views: 6066
Re: PIC18F26K42 and UART
Hello! Team
It seems there is no answer for my post for the moment, should I keep the thought alive of using this chip or drop that, kindly help.
Abhi
It seems there is no answer for my post for the moment, should I keep the thought alive of using this chip or drop that, kindly help.
Abhi
- Mon Jan 25, 2021 11:56 am
- Forum: Flowcode V8
- Topic: MCP3201 12-Bit ADC Component
- Replies: 19
- Views: 6892
Re: MCP3201 12-Bit ADC Component
Hello! CF
good afternoon
Finally i could run your chart successfully with the MCP3201, cheers to you my friend.
Again many many thanks for your efforts.
Abhi
good afternoon
Finally i could run your chart successfully with the MCP3201, cheers to you my friend.
Again many many thanks for your efforts.
Abhi
- Mon Jan 25, 2021 8:49 am
- Forum: Flowcode V8
- Topic: PIC18F26K42 and UART
- Replies: 9
- Views: 6066
Re: PIC18F26K42 and UART
Hello! Peter good morning Ah! happy to hear you, yes i am trying to ping Ben and team to look into this problem. I am feeling helpless now, i do not find any answer for the UART nor the speed of this chip, really struggling since couple of days, but hope to receive some answer after the weekend. The...
- Mon Jan 25, 2021 5:42 am
- Forum: Flowcode V8
- Topic: PIC18F26K42 and UART
- Replies: 9
- Views: 6066
Re: PIC18F26K42 and UART
Hello! Following my previous post, may i request how to solve the below is the error received after compiling. I tried using Channel1 and 2, changing the port pins but no success. Also i do not understand why the chip is running the display so slow. kindly try to help. Microchip MPLAB XC8 C Compiler...
- Sun Jan 24, 2021 5:03 pm
- Forum: Flowcode V8
- Topic: PIC18F26K42 and UART
- Replies: 9
- Views: 6066
PIC18F26K42 and UART
Hello! Team and Friends For some time i am trying to compile the attached chart but without success. May i request all to point out the mistake i am trying to configure the PIC for MODBUS slave and use that, it is not like i do not know how to use the MODBUS slave as i have used that in the past usi...
- Sat Jan 23, 2021 6:26 am
- Forum: Flowcode V8
- Topic: MCP3201 12-Bit ADC Component
- Replies: 19
- Views: 6892
Re: MCP3201 12-Bit ADC Component
Hello! CF Good morning I must say the above explanation is brilliant, I am understanding things which were difficult to understand in the past. In my opinion I am going to try a different SPI component to test how much did I understand and if I can do on my own, if there is some difficulty I will bo...
- Fri Jan 22, 2021 7:33 am
- Forum: Flowcode V8
- Topic: MCP3201 12-Bit ADC Component
- Replies: 19
- Views: 6892
Re: MCP3201 12-Bit ADC Component
Hello! Chipfryer (CF) good morning First of all million thanks for your time and efforts, i am obliged to receive your post/information/detailed study and the example chart. To be honest with you (i don't mind saying that on the forum) i am an amateur to understand the explanation you gave about the...
- Mon Jan 18, 2021 8:38 am
- Forum: Flowcode V8
- Topic: Migration from PIC18F26K22 to PIC18F26K42
- Replies: 6
- Views: 2644
Re: Migration from PIC18F26K22 to PIC18F26K42
Hello! Ben
good morning
Any advise for me, or do you think it is not possible to select hardware channel for I2C display, or should i drop the idea of using I2C display, kindly do the needful.
Abhi
good morning
Any advise for me, or do you think it is not possible to select hardware channel for I2C display, or should i drop the idea of using I2C display, kindly do the needful.
Abhi
- Sun Jan 17, 2021 4:36 am
- Forum: Flowcode V8
- Topic: MCP3201 12-Bit ADC Component
- Replies: 19
- Views: 6892
Re: MCP3201 12-Bit ADC Component
Hello! Ben
good morning
Any update on creating the component for MCP3201 or any other equivalent ADC, then i dont need to use PIC18F26K42 chip as every thing works well for me on the K22 chip, i am planning to use K42 only for 12bit ADC.
Abhi
good morning
Any update on creating the component for MCP3201 or any other equivalent ADC, then i dont need to use PIC18F26K42 chip as every thing works well for me on the K22 chip, i am planning to use K42 only for 12bit ADC.
Abhi
- Sun Jan 17, 2021 4:31 am
- Forum: Flowcode V8
- Topic: Migration from PIC18F26K22 to PIC18F26K42
- Replies: 6
- Views: 2644
Re: Migration from PIC18F26K22 to PIC18F26K42
Hello! Ben
good morning
Any advise on the I2C display or do you think i am making some mistake in setting the clock to 64MHz, the project option from build is so different then K22 chip, the I2C display works well on 64MHz on the K22 chip.
Abhi
good morning
Any advise on the I2C display or do you think i am making some mistake in setting the clock to 64MHz, the project option from build is so different then K22 chip, the I2C display works well on 64MHz on the K22 chip.
Abhi
- Sat Jan 16, 2021 12:36 pm
- Forum: Flowcode V8
- Topic: Migration from PIC18F26K22 to PIC18F26K42
- Replies: 6
- Views: 2644
Re: Migration from PIC18F26K22 to PIC18F26K42
Hello! Ben
I notice all the I2C components is having only software channel selection for the PIC18F26K42 chip.
The gLCD_SH1106_SPI is having the channel1 and software selection but gLCD_SH1106_I2C1 is having only software.
I hope this will help.
Abhi
I notice all the I2C components is having only software channel selection for the PIC18F26K42 chip.
The gLCD_SH1106_SPI is having the channel1 and software selection but gLCD_SH1106_I2C1 is having only software.
I hope this will help.
Abhi
- Sat Jan 16, 2021 10:58 am
- Forum: Flowcode V8
- Topic: Migration from PIC18F26K22 to PIC18F26K42
- Replies: 6
- Views: 2644
Re: Migration from PIC18F26K22 to PIC18F26K42
Hello! Ben May i request you to help me understand why there is no selection available for the channel (channel1, channel2) for the I2C display (gLCD_SH1106_I2C1), only option available is software, kindly correct me if i am wrong, but on software channel (RC3, RC4) the display works really very slo...
- Fri Jan 15, 2021 2:44 pm
- Forum: Flowcode V8
- Topic: Migration from PIC18F26K22 to PIC18F26K42
- Replies: 6
- Views: 2644
Re: Migration from PIC18F26K22 to PIC18F26K42
Hello!
One more update, compilation was done, i noticed one Interrupt TM3 was created in the chart and was disabled, i deleted that too and compilation was done.
Abhi
One more update, compilation was done, i noticed one Interrupt TM3 was created in the chart and was disabled, i deleted that too and compilation was done.
Abhi
- Fri Jan 15, 2021 2:28 pm
- Forum: Flowcode V8
- Topic: Migration from PIC18F26K22 to PIC18F26K42
- Replies: 6
- Views: 2644
Re: Migration from PIC18F26K22 to PIC18F26K42
Hello! Few updates, i noticed the I2C channel was not selected, which i did now, to software, there was no hardware selection like 18F26K22, but now there is no error for I2C, later i deleted all the macros and component for MODBUS slave, the UART error is gone, no doubt there is no component so i h...
- Fri Jan 15, 2021 1:33 pm
- Forum: Flowcode V8
- Topic: Migration from PIC18F26K22 to PIC18F26K42
- Replies: 6
- Views: 2644
Migration from PIC18F26K22 to PIC18F26K42
Hello! In the past i was using PIC18F26K22 and everything was working well in FC8, recently i migrated to PIC18F26K42 for 12bit ADC, only changing the chip in Project Options did not work, there are so many new settings :?: , i tried few settings but nothing is working, i am getting below error whil...
- Tue Jan 12, 2021 12:40 pm
- Forum: Flowcode V8
- Topic: Swap Vref to VCC and vice versa
- Replies: 5
- Views: 2398
Re: Swap Vref to VCC and vice versa
Hello! Ben
Perfect, as Chipfryer also said, always better from the expert. I check the result following your suggestion and keep you posted too.
Thank you again.
Abhi
Perfect, as Chipfryer also said, always better from the expert. I check the result following your suggestion and keep you posted too.
Thank you again.
Abhi
- Tue Jan 12, 2021 10:00 am
- Forum: Flowcode V8
- Topic: Swap Vref to VCC and vice versa
- Replies: 5
- Views: 2398
Re: Swap Vref to VCC and vice versa
Hello! CF :wink: Good morning You spot absolutely right, actually I wanted to use only one ADC pin to manage 2 different analog signals with 2 different reference voltages, and I wanted to change the setting in actual running. I am going to test your suggestion and keep you posted. Many thanks, I ap...