Matrix user forums

Hello

then with version 1 it works well, I just bought this model (version 2) and another one that is model A6, I want to do test with voice and data

Does not mention the version number

Enrique

Thank you for the datasheet

Enrique

Hello Kersing

I thank you for extended the topic, now I understand a bit more. . .

Enrique

Thanks Benj, it's clearer now

Best Regards
Enrique

Hello Benj In fact I am working with the SIM800L, it works perfectly with Flowcode and with the GPS NEO6, I want to make some circuits with these components, but I can not find a data sheet, in some pages they say that the SIM800L only works with the 2G network but in other stores that sell the prod...

Hello, Good morning,

We can find with flowcode the network that uses a GSM / GPRS module 2G, 3G, 4G

Thanks
Enrique

Hello

I also did the same thing, I did my own TX and RX and excellent work with the example published in Wiki, I work as 3 continuous transmissions, after that I could no longer run the nRF24L01. . .

Enrique

Mi uso requeria el sensor a corta distancia, pero cuando estaba haciendo pruebas en la que detecte la temperatura de la pared, considero que la distancia entre el sensor y la pared eran de 10 mts, tal vez haciendo otras pruebas podria alcanzar un poco mas; pero creo que se hagan las lecturas un poco...

Hola Kalmar, Hace un tiempo traia en mente un proyecto, para conteo de personas, detecta excelente la temperatura corporal, los sensores se dividen por cuadrantes, uno era 1x6 y el otro es mas amplio te sensaba 16 cuadrantes o sea un area dividida en 4x4. Cuando una persona atraviesa por esa linea (...

Hi Leigh, thanks for the response,

Is I needed to know; that could be reconfigured without damage in an operating time.

Best Regards
Enrique

Hello, a general question, In my program and in the hardware I am using several components, I have connected a Keypad (eb014) A0 A1 A2 A3 and C0 C1 C2 the keypad is only used the first time the circuit is turned on, only the keypad is re-occupied when you change Parameters, when the program is in a ...

Hello Benj

I have been testing the circuit for a day with flowchart of Flow 6 and it works perfectly, it is stable and it detects when you move it, but I need the SERIAL EEPROM 24C16 component of Flowcode7

Enrique

Hi Benj

Change it now to 255 but the Latitude continues to vary constantly between 25.xxxxx and 26.xxxxx

Enrique

Change it to 120 and 200 but the lcd display goes blank

Hi Benj I include the data you recommended, the same flow chart in Flow 6 and Flow 7 in Window 7 and Window 8 Flow 6 Lat 25.784667 Long -100.244140 constant 16 satellites Flow 7 Lat 25.xxxxx to 26.xxxxx Long -100.244140 Lat is changing 10 satellites Apparently it does not work Latitude in Flowcode 7...

Hello Benj,

I have window 7 and window 8, I will check the changes and I tell You, I keep you informed.
But the flowchart I use in Flow 6 works correctly and I import with Flow 7 without making any changes and only fails LATITUDE.

I will return the information.

Thank you
Enrique

Hello Matrix Forum I am doing a project that uses GPS (NEO BLOX 6M) with Flowcode 6 works perfectly, I am using the PIC18F26J11, but this pic has no internal EEPROM; Then change the project to Flow 7, with an external EEPROM 24C16, the problem is that the Latitude is constantly changing from 25.xxxx...

Hello

I hope you have served my 2 answers, I made them during work hours and maybe the drawing of the diagram with pencil were not very pretty !

THANK YOU
Enrique

Hello JLeith

I always connect it as Benj shows and it works correctly

Enrique

R1 R2 R3 connect to keypad to PIC direct

Hello

I think that R4, R5, R6 y R7 connected to Gnd and 100 k

Enrique

Hello

With this flowchart diagram we separate the reading taken from Irms and compare it with a normal consumption constant.

But I can not specifically separate that value

Thanks
Enrique

Now what I want to do is send a PIC information using FLOW7, by the UART port (RS232). I made this small flowchart diagram, but it gives me the same 5 data in a row, as I can separate each data and with this I can make comparisons with the pic, send data by sms or do power supply cut. Any help to gu...

Hi, good morning, I have continued to seek information on this subject, but I have not found anything that I can work on it; But finally I found a library of arduino and with some components; a current transformers (SCT-013-000), a voltage transformer of 127 vac to 12 vac and a few resistors and cap...