Search found 161 matches
- Fri Apr 08, 2022 4:41 pm
- Forum: Flowcode V8
- Topic: 15V Voltmeter at 3v3 mcu (SOLED)
- Replies: 5
- Views: 8782
Re: 15V Voltmeter at 3v3 mcu
For fine tuning, I formed R1 from 10k adjustable and 27k fixed, and I adjusted the potentiometer until I read the measured value with a reliable voltmeter.
- Fri Apr 08, 2022 6:57 am
- Forum: Flowcode V8
- Topic: 15V Voltmeter at 3v3 mcu (SOLED)
- Replies: 5
- Views: 8782
Re: 15V Voltmeter at 3v3 mcu (SOLED)
Thanks again for your help, Martin! I put the resistors as you said and everything goes very well, everything is linear! There are no differences in different voltages. When you have some free time, can you explain to me why " * 5 " ? Later edit: I think I understand, 5 is the ratio between the inpu...
- Thu Apr 07, 2022 6:47 am
- Forum: Flowcode V8
- Topic: 15V Voltmeter at 3v3 mcu (SOLED)
- Replies: 5
- Views: 8782
15V Voltmeter at 3v3 mcu (SOLED)
Hi guys! I need your help again! I want to make a voltmeter for my car and I can't handle with math ... Mcu I use is 18F26K20, powered at 3.3 v, powered by the car's electrical installation through a stabilizer ld111733. 1) What values should the divider resistors have (R1, R2) ? 2) What should the ...
- Fri Jan 15, 2021 9:22 pm
- Forum: Flowcode V8
- Topic: Configure RC5 component (SOLVED).
- Replies: 4
- Views: 2295
Re: Configure RC5 component.
I figured it out, I exchanged the wires between them pwm with tx and everything is working fine now.
Thanks for the prompt support!
Thanks for the prompt support!
- Fri Jan 15, 2021 3:26 pm
- Forum: Flowcode V8
- Topic: Configure RC5 component (SOLVED).
- Replies: 4
- Views: 2295
Re: Configure RC5 component.
Thank you for your help in not knowing how many times, Benj. I modified the connections according to the received scheme. No positive results. I want to mention that I did not find the SCHOTTKY diode in the drawer, so I put a normal diode. Can this be a cause? If I look at the IR LED through the cam...
- Thu Jan 14, 2021 8:12 am
- Forum: Flowcode V8
- Topic: Configure RC5 component (SOLVED).
- Replies: 4
- Views: 2295
Configure RC5 component (SOLVED).
Hi guys! I'm struggling to configure the RC5 component in FC8 and I can't make it work. I want to make a remote control for an old Philips TV. Do I need to add another PWM component? If so, how do I configure that as well? I work with a pic 16lf1824, configured with internal clock at 32MHz, internal...
- Thu Dec 03, 2020 10:25 pm
- Forum: Flowcode V8
- Topic: Capture RS232 string
- Replies: 1
- Views: 1204
Capture RS232 string
Hello everyone! I need your help again. I've been working on a project for a while and I can't finish it. The project is a watch that will have no buttons. I have an ESP8266 that connects to the wifi network in the house and transmits RS232 serially a phrase that looks like this: "$HHMMSS". The prob...
- Thu Sep 03, 2020 6:22 pm
- Forum: Feature requests
- Topic: Add Serial MCU interface (HT1632C)
- Replies: 1
- Views: 6141
Re: Add Serial MCU interface (HT1632C)
Hi Patrick!
I've been struggling for a while to drive HT1632C ... Can you give me an example in Flow Code, to see how you managed to use it?
Thank you very much!
Puiu
I've been struggling for a while to drive HT1632C ... Can you give me an example in Flow Code, to see how you managed to use it?
Thank you very much!
Puiu
- Tue Dec 17, 2019 2:51 pm
- Forum: Flowcode V8
- Topic: 18F67K22 EB006
- Replies: 3
- Views: 2421
Re: 18F67K22 EB006
I have a pickit 3, but I do not find in the list of microcontrollers 18F67K22 in the standalone pickit 3 application for windows, although in the PicKit 3 datashhet is listed as supported 18F76K22.
- Mon Dec 16, 2019 11:11 pm
- Forum: Flowcode V8
- Topic: 18F67K22 EB006
- Replies: 3
- Views: 2421
18F67K22 EB006
Hi!
I'm struggling to write a PIC 18F67K22 with FC and EBLOCK EB006 and I get the error:
Can you help me with a solution?
Thanks!
I'm struggling to write a PIC 18F67K22 with FC and EBLOCK EB006 and I get the error:
Can you help me with a solution?
Thanks!
- Mon Nov 11, 2019 3:39 pm
- Forum: Flowcode V8
- Topic: Help with GLCD Toshiba T6963C (SOLVED)
- Replies: 16
- Views: 12002
Re: Help with GLCD Toshiba T6963C
Is there a possibility to import the bitmap into Flowcode?
Thank you!
Thank you!
- Fri Nov 08, 2019 6:06 pm
- Forum: Flowcode V8
- Topic: Help with GLCD Toshiba T6963C (SOLVED)
- Replies: 16
- Views: 12002
- Fri Nov 08, 2019 5:27 pm
- Forum: Flowcode V8
- Topic: Help with GLCD Toshiba T6963C (SOLVED)
- Replies: 16
- Views: 12002
Re: Help with GLCD Toshiba T6963C
Thank you so much for your support! No need to send it back, keep it for future tests.
- Tue Nov 05, 2019 3:12 pm
- Forum: Flowcode V8
- Topic: Help with GLCD Toshiba T6963C (SOLVED)
- Replies: 16
- Views: 12002
Re: Help with GLCD Toshiba T6963C
I am glad that the package arrived. You can use any voltage up to 30v dc (usually 12V). The marking of the regulators cannot be seen, because I made a mistake when I designed the pcb and mounted them upside down :lol: I can't wait for good news! Thank you! L.E.: This is the PDF datasheet for glcd: p...
- Mon Nov 04, 2019 6:25 pm
- Forum: Flowcode V8
- Topic: Help with GLCD Toshiba T6963C (SOLVED)
- Replies: 16
- Views: 12002
Re: Help with GLCD Toshiba T6963C
CO974922531RO
This is the track number.
Thank you!
This is the track number.
Thank you!
- Mon Nov 04, 2019 6:20 pm
- Forum: Flowcode V8
- Topic: Help with GLCD Toshiba T6963C (SOLVED)
- Replies: 16
- Views: 12002
Re: Help with GLCD Toshiba T6963C
I sent you last Thursday a GLCD (the green one) along with the "controller" made by me with pic 18F26K20 by post, these days you must receive it.
Thank you!
Thank you!
- Sat Nov 02, 2019 10:31 am
- Forum: Flowcode V8
- Topic: Help with GLCD Toshiba T6963C (SOLVED)
- Replies: 16
- Views: 12002
Re: Help with GLCD Toshiba T6963C
Thank you for your reply.
The image is made by hand in Flowcode with circle, rectangle, etc.
The image is made by hand in Flowcode with circle, rectangle, etc.
- Thu Oct 31, 2019 7:07 pm
- Forum: Flowcode V8
- Topic: Help with GLCD Toshiba T6963C (SOLVED)
- Replies: 16
- Views: 12002
Re: Help with GLCD Toshiba T6963C
Today I got another GLCD also with T6963 and also 64x240 and the result is the same. Interestingly, the image tends to appear twice, after the image is finished, the same image continues to start. I attach the image from the laptop and the images displayed on both GLCD. Image from Laptop: Laptop.jpe...
- Wed Oct 30, 2019 4:25 pm
- Forum: Flowcode V8
- Topic: Help with GLCD Toshiba T6963C (SOLVED)
- Replies: 16
- Views: 12002
another 3 files attached
HW
Flowcode file
- Wed Oct 30, 2019 4:22 pm
- Forum: Flowcode V8
- Topic: Help with GLCD Toshiba T6963C (SOLVED)
- Replies: 16
- Views: 12002
Help with GLCD Toshiba T6963C (SOLVED)
I have been struggling for a long time to use the GLCD based on the Toshiba T6963C chip ... I asked for help including this forum in an older topic (a topic opened by a colleague). I made a proper pcb to exclude any connection errors. I can't write anything readable on it with Flowcode 8. Anyone man...
- Tue Apr 02, 2019 11:21 am
- Forum: Programming Tips & Tricks
- Topic: Display TM1637!
- Replies: 17
- Views: 19805
Re: Display TM1637!
Now, everything seems to be all right and everything goes well.
Thank you again!
Thank you again!
- Mon Apr 01, 2019 7:25 pm
- Forum: Programming Tips & Tricks
- Topic: Display TM1637!
- Replies: 17
- Views: 19805
Re: Display TM1637!
First of all, thank you for helping me again, sir!
I did a test, but I do not see how the macro works ...
Can you look at the file?
Once again, thank you!
I did a test, but I do not see how the macro works ...
Can you look at the file?
Once again, thank you!
- Fri Mar 29, 2019 11:11 pm
- Forum: Programming Tips & Tricks
- Topic: Display TM1637!
- Replies: 17
- Views: 19805
Re: Display TM1637!
Please help me at least by directly accessing the segments to print custom characters, with the decimal point I can do by myself with the addition of a transistor.
Thank you!
Thank you!
- Sun Mar 03, 2019 12:43 pm
- Forum: Programming Tips & Tricks
- Topic: Display TM1637!
- Replies: 17
- Views: 19805
Re: Display TM1637!
I am already on the second project with TM1637 and I'm struck by the same problem: I can not use the decimal point. This time I really need to, because I'm doing a DRO.
Can anyone change TM1637 component for FC8?
Thank you!
Can anyone change TM1637 component for FC8?
Thank you!
- Mon Feb 04, 2019 2:42 pm
- Forum: Programming Tips & Tricks
- Topic: Display TM1637!
- Replies: 17
- Views: 19805
Re: Display TM1637!
Yes, it has decimal points and I have to use it ...
If it connects cascaded, I only have two lines of command CLK and DIO.
I want, for example, to write "u" or "U", how can I do that?
Thank you!
If it connects cascaded, I only have two lines of command CLK and DIO.
I want, for example, to write "u" or "U", how can I do that?
Thank you!