Search found 574 matches
- Mon Aug 15, 2011 9:07 am
- Forum: Deutsch Support-Forum
- Topic: Variablen Typ
- Replies: 8
- Views: 7269
Variablen Typ
Hallo Team Ich lege nur eine "0x00000000" oder "0x00000001" in der ee_prom Speicherzelle ab; spielt da eine Rolle ob es Byte - oder Integer -Variablen sind ???? Ist es zwingend notwendig den Variablen-Type , welcher in "Parameters" vorgeschlagen wird zu verwenden?! (bezieht sich auf alle Flowcode Ma...
- Fri Aug 12, 2011 11:27 am
- Forum: Deutsch Support-Forum
- Topic: Temporary fixes for V4.5 PICmicro release
- Replies: 9
- Views: 9110
Re: Temporary fixes for V4.5 PICmicro release
Hallo Team Gestern hat medelec35 ein File:missing i 12F615 nterrupts: Flowcode v4.5.18.74 in "Temporary fixes for V4.5 PICmicro release" abgelegt,jetzt ist es im Bug - Ordner. zwei Fragen: Wird für alle Flowcode-versionen : pic,dspic,arm und avr ein Temporary fixes for V......... angelegt? warum bef...
- Fri Aug 12, 2011 11:14 am
- Forum: Deutsch Support-Forum
- Topic: EE-Prom 30F6012A
- Replies: 3
- Views: 4037
Re: EE-Prom 30F6012A
Hallo Benj Habe die Variablen für das EE_Prom Macro von Byte in Integer umgewandelt >> jetzt scheint es zu gehen (kurztest). Deine Vermutung scheint richtig zu sein!!!! Ich lege nur eine "0x00000000" oder "0x00000001" in der Speicherzelle ab; spielt da eine Rolle ob es Byte - oder Integer -Variablen...
- Thu Aug 11, 2011 6:54 pm
- Forum: Deutsch Support-Forum
- Topic: EE-Prom 30F6012A
- Replies: 3
- Views: 4037
EE-Prom 30F6012A
Hallo Matrix Team Möchte im internen EE_Prom gerne die Zustandswerte für ein paar Tasten ablegen. Es funktioniert im internen EE_prom eines 18F67K22 zur vollen Zufriedenheit. Habe den Code in DS-Pic 30F6012A importiert und muß feststellen,das das eeprom-macro nicht richtig funktioniert!(manchmal ok ...
- Thu Aug 11, 2011 10:29 am
- Forum: Deutsch Support-Forum
- Topic: USB Bootloader für PIC18F4550? Wie geht das?
- Replies: 9
- Views: 9493
Re: USB Bootloader für PIC18F4550? Wie geht das?
Hallo Jürgen So einfach geht es leider nicht;entweder du kaufst bei elektor einen"ecio40pin" und behandelst diesen Print als ein "40-poligen Chip mit usb-programmierung" 4Stck = ca. 100€ >> http://www.elektor.de/products/e-blocks/ecio/ec927-pic-ecio-40-pin-(4x).269920.lynkx 1Stck = ca 30€ >> http://...
- Wed Aug 10, 2011 8:34 am
- Forum: Deutsch Support-Forum
- Topic: USB Bootloader für PIC18F4550? Wie geht das?
- Replies: 9
- Views: 9493
Re: USB Bootloader für PIC18F4550? Wie geht das?
Hallo Jürgen Das Bild von der Belegung ist nicht identich mit der Chip-belegung. Der Hauptspeicher (Flash) ist ist beim 4550 um 8K größer. Ecio40pin ist mit Flowcode schon eine Einheit. d.h.: Schreibe dein Projekt in Flussdiagramm >>> teste es in Flowcode ob es alles richtig macht;was du möchtest >>...
- Thu Aug 04, 2011 10:35 am
- Forum: Deutsch Support-Forum
- Topic: Update Prozedur
- Replies: 0
- Views: 2996
Update Prozedur
Hello Gestern habe ich ein neues Matherboard installiert und bin mit einem Acronis-Image-Wiederherstellung-Tool "umgezogen". Habe Flowcode auf version mit der Update-Funktion überprüft,neueste Stand 4.5 kam als Meldung. Nachdem ich meinen Code startete und compile to hex ausführte,bekam ich wieder m...
- Thu Aug 04, 2011 9:30 am
- Forum: Deutsch Support-Forum
- Topic: Temporary fixes for V4.5 PICmicro release
- Replies: 9
- Views: 9110
Re: Temporary fixes for V4.5 PICmicro release
Hallo Steve Benj
Der Ordnung halber habe ich die Registrierung des WLAN-Macros durchgeführt und erhalte
eine Fehler-Meldung.
Gruss Wolfgang
Der Ordnung halber habe ich die Registrierung des WLAN-Macros durchgeführt und erhalte
eine Fehler-Meldung.
Gruss Wolfgang
- Wed Aug 03, 2011 11:02 am
- Forum: Deutsch Support-Forum
- Topic: Temporary fixes for V4.5 PICmicro release
- Replies: 9
- Views: 9110
Re: Temporary fixes for V4.5 PICmicro release
Hallo Benj
Wunderbar,jetzt ist es übersichtlich!
Danke Wolfgang
Wunderbar,jetzt ist es übersichtlich!
Danke Wolfgang
- Tue Aug 02, 2011 12:55 pm
- Forum: Deutsch Support-Forum
- Topic: Temporary fixes for V4.5 PICmicro release
- Replies: 9
- Views: 9110
Temporary fixes for V4.5 PICmicro release
Hallo Team
Wäre es möglich die einzelnen Files mit Datum zu versehen,um zu erkennen,ob meine updates auf neuestem Stand sind ?
Gruss Wolfgang
Wäre es möglich die einzelnen Files mit Datum zu versehen,um zu erkennen,ob meine updates auf neuestem Stand sind ?
Gruss Wolfgang
- Mon Aug 01, 2011 3:16 pm
- Forum: Deutsch Support-Forum
- Topic: 18F67K22 adc problem
- Replies: 6
- Views: 5343
Re: 18F67K22 adc problem
Hello Benj
"Ich ziehe meinen Hut vor Dir",das ADC-Macro arbeitet jetzt wie ich es mir vorstelle.
Werde mein Projekt fortsetzen.Vielen Dank
Gruss Wolfgang
PWM[0] _1 > pin RC2 und PWM[0]_2 > alternative Pin > RE7 ist jetzt auch in Ordnung!
nochmals Danke
"Ich ziehe meinen Hut vor Dir",das ADC-Macro arbeitet jetzt wie ich es mir vorstelle.
Werde mein Projekt fortsetzen.Vielen Dank
Gruss Wolfgang
PWM[0] _1 > pin RC2 und PWM[0]_2 > alternative Pin > RE7 ist jetzt auch in Ordnung!
nochmals Danke
- Mon Aug 01, 2011 1:53 pm
- Forum: Deutsch Support-Forum
- Topic: 18F67K22 adc problem
- Replies: 6
- Views: 5343
Re: 18F67K22 adc problem
Hello Benj
Ich kann mit dem Scope ein wechselndes Signal an port c messen ( viewing),ohne das poti zu verändern.
siehe PM:
If i turn the poti to 0,I show on my scope on port RC a periode between 50 and 100ms (without change the poti position)
In Simulation the value is from 0 to 255.
Gruss Wolfgang
Ich kann mit dem Scope ein wechselndes Signal an port c messen ( viewing),ohne das poti zu verändern.
siehe PM:
If i turn the poti to 0,I show on my scope on port RC a periode between 50 and 100ms (without change the poti position)
In Simulation the value is from 0 to 255.
Gruss Wolfgang
- Sat Jul 30, 2011 6:37 pm
- Forum: Deutsch Support-Forum
- Topic: 18F67K22 adc problem
- Replies: 6
- Views: 5343
18F67K22 adc problem
Hallo " Flowcodler" und "matrix Admins" Meine Probleme,mit dem ADC Macro sind leider nicht aus der Welt (trotz adc-update).Es werden einfach keine definierten Poti-Werte ausgelesen. Im Listing steht: void FCD_ADC1_SampleADC() { /*******Supported Devices***********************************************...
- Wed Jul 20, 2011 8:34 am
- Forum: Flowcode V4
- Topic: 18F67k22
- Replies: 14
- Views: 6876
Re: 18F67k22
Hello Team
What can i do fix the error`s ? ; Because I cant go on with my project!
Regards Wolfgang
What can i do fix the error`s ? ; Because I cant go on with my project!
Regards Wolfgang
- Mon Jul 18, 2011 5:31 pm
- Forum: Flowcode V4
- Topic: 18F67k22
- Replies: 14
- Views: 6876
Re: 18F67k22
Hello Benj
I name my project _ecio40pinxxxxx because my print is the identical construction with the 18F67k22.
Your tip "take default`s" dos not fix the error.
So i start new with input macros....after a 2 adc i have the error ; the thame after i put in a pwm macro
Regards Wolfgang
I name my project _ecio40pinxxxxx because my print is the identical construction with the 18F67k22.
Your tip "take default`s" dos not fix the error.
So i start new with input macros....after a 2 adc i have the error ; the thame after i put in a pwm macro
Regards Wolfgang
- Mon Jul 18, 2011 4:08 pm
- Forum: Flowcode V4
- Topic: 18F67k22
- Replies: 14
- Views: 6876
Re: 18F67k22
Hello Benj
I changing files without succsess.
Regards Wolfgang
I changing files without succsess.
Regards Wolfgang
- Mon Jul 18, 2011 3:02 pm
- Forum: Flowcode V4
- Topic: 18F67k22
- Replies: 14
- Views: 6876
Re: 18F67k22
Hello Benj
Thank you for effort,but the file is for 18F45k20;
must i rename the file to 18f67k22 ; because i have compile rerror with this chip?
Regards Wolfgang
Thank you for effort,but the file is for 18F45k20;
must i rename the file to 18f67k22 ; because i have compile rerror with this chip?
Regards Wolfgang
- Mon Jul 18, 2011 12:55 pm
- Forum: Flowcode V4
- Topic: 18F67k22
- Replies: 14
- Views: 6876
Re: 18F67k22
Hello Benj
The 18F45K20 can work with 64MHZ.....
set the config bits , work with the new ppp ok,
but compile to hex,i have the same error.
Regards Wolfgang
The 18F45K20 can work with 64MHZ.....
set the config bits , work with the new ppp ok,
but compile to hex,i have the same error.
Regards Wolfgang
- Mon Jul 18, 2011 12:02 pm
- Forum: Flowcode V4
- Topic: 18F67k22
- Replies: 14
- Views: 6876
Re: 18F67k22
Hello Benj
If i want compile....
Regards Wolfgang
If i want compile....
Regards Wolfgang
- Mon Jul 18, 2011 11:47 am
- Forum: Flowcode V4
- Topic: 18F67k22
- Replies: 14
- Views: 6876
Re: 18F67k22
Hello Benj
I cant set config-bits and speed,show screen-shot`s
Regards Wolfgang
I cant set config-bits and speed,show screen-shot`s
Regards Wolfgang
- Mon Jul 18, 2011 11:11 am
- Forum: Flowcode V4
- Topic: 18F67k22
- Replies: 14
- Views: 6876
18F67k22
Hello Team
I have different problem`s with these chip (also with the beta) !
At what time i can hope for a solution?
Regards Wolfgang
I have different problem`s with these chip (also with the beta) !
At what time i can hope for a solution?
Regards Wolfgang
- Fri Jul 08, 2011 12:17 pm
- Forum: Deutsch Support-Forum
- Topic: leer Platinen
- Replies: 1
- Views: 3034
leer Platinen
Helle David
Besteht die Möglichkeit unbestückte Platinen vom Typ ECIO-40pin käuflich zu erwerben?
Gruß Wolfgang
Besteht die Möglichkeit unbestückte Platinen vom Typ ECIO-40pin käuflich zu erwerben?
Gruß Wolfgang
- Mon Jul 04, 2011 1:28 pm
- Forum: Flowcode V4
- Topic: New Devices from Microchip
- Replies: 28
- Views: 15671
Re: New Devices from Microchip
Hello Steve
I think the "update strategy" from matrix is not the best for the user,
because the most user want work with the new chips and newest compiler
not priority with new hardware-products i think .
Regards Wolfgang
I think the "update strategy" from matrix is not the best for the user,
because the most user want work with the new chips and newest compiler
not priority with new hardware-products i think .
Regards Wolfgang
- Fri Jun 10, 2011 4:32 pm
- Forum: Flowcode V4
- Topic: ds_pic compile to hex
- Replies: 5
- Views: 3612
Re: ds_pic compile to hex
Hello Steve After i change the file , i can compile to hex inside flowcode, but the .c file generate with the c30 v3.25 also a error, so i cant program over the way mplab >> icd3.... After change back the file i can not fix these error.... luckily with a copy of the Folder i have the old situation w...
- Fri Jun 10, 2011 2:03 pm
- Forum: Flowcode V4
- Topic: ds_pic compile to hex
- Replies: 5
- Views: 3612
Re: ds_pic compile to hex
Hello Steve
Here are the files
Regards Wolfgang
Here are the files
Regards Wolfgang