Matrix user forums

Hi after a lot of firmware issues finally got something that talks back to me. When I use flowcode to talk to the ESP8266 I can see all the right AT commands but no response back. It seems like the command termination is not correct. I am doing this on an Arduino UNO board with sparkfun shield, actu...

Ok thanks I found the problem it is the serial port on the Leonardo I use. It has an XBEE socket and I am plugging a wee ESP8266 in there. The schematic indicates the serial as D+ and D- . Can I change this in Flowcode as it allows only for Channel 1 D3 and D2.

Anybody tried the ESP8266 on Arduino UNO or Leonardo I get c warning: passing argument 3 of 'FCI_SCOPY' discards qualifiers from pointer target type when I compile.
Any idea how to solve this. THX

Hi I am trying to get the ESP8266 going with flowcode. Lots of info but where do I start. What Firmware, the flowcode part is it AT commands, LUA. Then some videos shows a chippack. LUA seems good but I would rather use flowcode for all sorts of reasons mainly on Arduino boards. The Flowcode help fi...

Hey I am getting worried any progress on an update? I can imagine any newcomer that gets 6.07 wont be impressed at all. Version 5 still seem to be a better option

Yeh I am doing ok its just so much easier to click and press help when you need it.

Hi Ben
Any idea when we can expect bug fixes.
I tried to do a pm but no luck
THX
Georg

Hi Guys
Any news on fixes for the latest release ?
We are are limping on a very buggie environment.
Seems that work done in 6.07 cannot be opened in previous 6.0.4 version.
I get some startup error

Thanks then the For Loop where is that hidden I cant find it

Just put a Visi object down and try to select objectid

Then when I run simulation in this mode everything just freezes. Please try and do write or read object to visi and see what happens the objected id just blank. Then try and run simulate. Actually the for loop is nice.

I checked again and again. visiwrite object or read is the problem

Ok I just removed the old version deleted the folder now I have more problems . Visi still don't work. I have waisted many hours on this now. I did not clean the registry as this is another can of worms.

I get all sorts of mail on the new flowcode version. Then I simply cant get it to work. If I install it gives blank fields in visi. Seems all the support tied up with other bugs. What must the installation procedure be as it came from patch after patch. Some feedback like installing this first then ...

No it is still not working the Visiwriteobject is blank. Hardware is working have to go back again to a previous version.

Hi I updated the latest patch and several components stopped working. Visi for instance shows only a blank screen when I try to use it.

Hi Leigh Thanks this worked for me thanks. Now a second problem maybe you can help with this. I have a 4dsystems display and I wan to use a winbutton to send various bytes to an ID. The problem I have is after the first byte the CAN keeps on sending and never stops. I tried connecting reset to an ou...

Wow thanks a lot I will try

Just some more info on this problem. The board I am using has a 16 MHz xtal and the EBlocks I see use 20 MHz this is also 80% as my buadrates are also 80% of what it should be.
Thanks

sorry baud was suppose to be 125 kbps comes out as 100kbps and 250 as 200 on the analyser. I a, using a board from mikroelektronika but what I need is to change the baud rate in flowcode. I want to send J1939 It seems to me that in flowcode 5 ther was some control over this but not in flowcode 6.

Hi I amusing an Arduino Uno board with Microchip Can via spi. I found that when I set baud to 125 khz my analyser says its 100khz. Now on J1939 I need 250 khz but I dont get comms. Is there a way to calibrate this in flowcode other than trial and error to get this correct. Then it may be fuse bits o...

Yes I have a Teltonika uni that accepts can information on J1939 I want to add some information but keep on sending 0 . Timing seems to be also a problem. The way Flowcode handles the ID etc I find a bit difficult to understand how to map to J1939

I am trying to send can bus messages to a device that can log J1939. The can analyzer I use and the settings on Flowcode firstly differ I set it to 125 kHz in flowcode and the analyzer too 100 kHz to se the codes coming through. This now with atmel and microchip Can. I need some test code on J1939 i...

I seem to have the Can Bus working etc. But I want to talk to J1939 devices and maybe somebody had some success on this as I need a few pointers.
I Have a IMFSoft can analyser but keep on getting error messages when I send data from my node. Anybody with some experience or a an example on this.

I have another question on 1wire. Is there a way in flowcode to calculate crc. All I see is crc being checked. In the case of emulating 1wire I want to generate a code and the crc ? I see it is in Modbus and 1wire bit not as in as standalone function
Thanks?