Hi Ben,
I had been hoping to use the auto baud function so the fact that its not currently supported is going to be a bit of an issue. I'll probably take your advice and try to do it and sample at max baud rate then go from there.
Thanks for the input, much appreciated.
Cheers, Darren.
Search found 10 matches
- Thu Jan 02, 2014 4:09 pm
- Forum: Flowcode V4
- Topic: Handling asynchronous data input
- Replies: 2
- Views: 3993
- Thu Jan 02, 2014 2:09 pm
- Forum: Flowcode V4
- Topic: Handling asynchronous data input
- Replies: 2
- Views: 3993
Handling asynchronous data input
Hi, Happy New Year to all. I am a hardware engineer, and have been using Flowcode V4 for a couple of years. I now need to tackle a new concept for me and I'm looking for some advice. Essenitally I have an RF receive module from which I need to accept data and handle within a PIC. The RF module will ...
- Sun Sep 29, 2013 11:52 am
- Forum: General Programming
- Topic: Storing a Binary Bit Stream Best way
- Replies: 1
- Views: 2639
Storing a Binary Bit Stream Best way
Hi All Just getting back into flowcode after a while away so after some pointers... I have a binary bit stream that will vary in length and bit rate, it is coming from a radio receiver. I want to store this to play back through a transmitter at a later date, what is the best way to store a binary bi...
- Tue May 22, 2012 12:16 pm
- Forum: C and ASM Programming
- Topic: SPI bus to External Output Pin ASM code
- Replies: 3
- Views: 5213
Re: SPI bus to External Output Pin ASM code
Hi Ben,
Many thanks for that I will certainly try that and see if it works, we do have working ASM code that compiles but internal values are passed via the SPI bus we just need to bring this out to an external pin, sounds simple...
Best Regards
Darren
Many thanks for that I will certainly try that and see if it works, we do have working ASM code that compiles but internal values are passed via the SPI bus we just need to bring this out to an external pin, sounds simple...
Best Regards
Darren
- Fri May 18, 2012 11:46 am
- Forum: C and ASM Programming
- Topic: SPI bus to External Output Pin ASM code
- Replies: 3
- Views: 5213
SPI bus to External Output Pin ASM code
Hi all
Not a great ASM coder, I have some existing ASM code from a PIC application note, but I need to access some of the data on the SPI bus on an external PIN, any thoughts on how to do this.
Any help would be greatly appreciated
Best Regards
Darren
Not a great ASM coder, I have some existing ASM code from a PIC application note, but I need to access some of the data on the SPI bus on an external PIN, any thoughts on how to do this.
Any help would be greatly appreciated
Best Regards
Darren
- Tue Mar 20, 2012 7:00 pm
- Forum: General Programming
- Topic: ASM to FLowcode Help
- Replies: 3
- Views: 2724
Re: ASM to FLowcode Help
Hi BenJ I think there may be a little confusion here. The LF is denoting the Low Frequency of 125 KHz, basically it the 16F639 and 16F636 have 3 axis Low Frequency receiver in them and I need to know how to implement this in flow code. I have an ASM routine for the 3 Axis receiver, but not very prof...
- Tue Mar 20, 2012 12:56 pm
- Forum: C and ASM Programming
- Topic: ASM Flowcode Module
- Replies: 0
- Views: 3354
ASM Flowcode Module
Hi all I am using a PIC16F639 or PIC16F636 which is an 125 KHz LF enabled micro controller. We are quite competent in flowcode, but not sure where to start with this device. We have ASM for the device, but not sure which parts to cut and paste to make a flow code module for the device. I am looking ...
- Tue Mar 20, 2012 9:53 am
- Forum: General Programming
- Topic: ASM to FLowcode Help
- Replies: 3
- Views: 2724
ASM to FLowcode Help
Hi all Anyone wishing to help it would be most appreciated. I am using a PIC16F639 or PIC16F636 which is an 125 KHz LF enabled micro controller. We are quite competent in flowcode, but not sure where to start with this device. We have ASM for the device, but not sure which parts to cut and paste to ...
- Tue Mar 20, 2012 9:50 am
- Forum: Freelance Embedded Engineers
- Topic: Keith Sloan
- Replies: 2
- Views: 28316
Re: Keith Sloan
Hi David I hope you do not mind I got your details from the Flowcode forums. I am using a PIC16F639 or PIC16F636 which is an 125 KHz LF enabled micro controller. We are quite competent in flowcode, but not sure where to start with this device. We have ASM for the device, but not sure which parts to ...
- Tue Mar 20, 2012 9:49 am
- Forum: Freelance Embedded Engineers
- Topic: Jac Kersing
- Replies: 5
- Views: 34793
Re: Jac Kersing
Hi Jac I hope you do not mind I got your details from the Flowcode forums. I am using a PIC16F639 or PIC16F636 which is an 125 KHz LF enabled micro controller. We are quite competent in flowcode, but not sure where to start with this device. We have ASM for the device, but not sure which parts to cu...