Matrix user forums

Hello!
I wonder how I enable an interrupt when one pin goes to high in Flowcode.
Interrupt to call any function.
I would be wery grateful if someone makes an example on any PIC.
Thank you!
Best Regards
Dmitry

Hi! Is it possible to use other GSM module than the EB066? There's a lot if you look at the market. If you look on the EB066, it looks to the substantive set some components, possibly a processor that sits on the card that does some work. EB066 is certainly helpful to start with. I saw second module...

No, I don´t think so. This file is for 16f1827. Please ask Benj on Flow forum. He answered me before.
He will surely respond by Monday. The guys are fast!
Best Regards
Dmitry

Hi,
It can be problem with ADC file in flow (for 16f1827is PIC_ADC_23.c). I have got new one from Benj.
Best Regards
Dmitry

Hello Benj!
I want to do to learn more about C. Whay you don´t rekomend it?
Can you please answer the question I asked before " MPLAB needs compiler. Can I use the same compiler that comes with Flovcode?"
Thanks for the reply!

Hi again! It seems complicated and quite time consuming converting from Boost. The question is if I made a program that works in Flovcode and then I go over to MPLAB to continue to work with C code. MPLAB needs compiler. Can I use the same compiler that comes with Flovcode? My program is pretty big ...

HI!
I would like to test cc5x compiler. What settings I need to make in the flowcode?
Is it chip> compiler options>??

Very thankful for all answers
Best Regards
Dmitry

Hello!
OK, can we use cc5x compiler in the Flowcode?

Very thankful for all answers
Best Regards
Dmitry

Hello!
Is it possible to convert Flowcode C file to the MPLAB IDE with a free compiler like CC5X for further work?
IF possible, what steps do I need to do?

Very thankful for all answers
Best Regards
Dmitry

Hello!
I wonder a bit about the macro structure in Flowcode.
When repeating things in the program will then wish to use the macros.
Is it okay to call 1) component macro from a macro.
2) Call the macro from a macro?
Can there be any problems?
Very thankful for all answers
Best Regards
Dmitry

Hi, I vill use variable "Ustrkorr" to adjust another integer variable "Ukorred" depending on in data. so "Ustrkorr" is an correction variable. Ustrkorr = INT Uout = INT Ukorred = INT Ustrkorr can vary betveen 1.0 to 1.09 In calculation box I was going to multiply the variables to get a corrected val...

In my program, there are several parameters that affect each other. I have to do mathematical calculations as you can see below. I enter into the calculation blocks: Ustrkorr = ( ( ( adc_level_current / 100 ) / 100 ) + 1 ) I wonder if I can do so. Mathematically it is correct, at least when I'm coun...

Hi Martin!
Thank you for quick response!
I had some problem with my code. Now it works:-)
Best Regards

HI, I use pic16f1827 in a project. I found that RB7 is not working properly. I've added a routine that lights a LED, among other things. It seems that the program starts and do everything else but RB7 do not want to get high. I also tried to activate it several times but to no avail. I saw similar p...

Does anyone have an idea?
Thanks
Best Regards

Does anyone have an idea?
Thanks
Best Regards

Hi I have various different warnings when I compile my program. Is it normal or have I done something wrong? " Warning unreferenced functions removed: FCI_FLOAT_TO_STRING in: C:\Program Files\Matrix Multimedia\Flowcode V4\FCD\internals.h FCI_NUMBER_TO_HEX in: C:\Program Files\Matrix Multimedia\Flowc...

Hi Benj! When I had old FCD file it worked when I had option "alternate pin" activated, not without it. OK,now, when I changed to new FCD it seems to work if I change "alternate pin" to off. Should it work that way? Benj, what do you mean by "or the chip config settings"? Thank you! Best Regards Dmi...

Benj
After updating of 16f1827.fcd my PWM stopped to work!
What happens?
Please advice
Thank you

Hi people!
Is there anyone who has used Capacitive Sensing oscillator ?
Is very interested in how it works
Please recommend how I should get started:-)
Best Regards
Dmitry

Hi Benj! Capacitive sensing module is available in many today's MCUs from Microchip and it is quite interesting module. So I see it as a littet miss the flowcode does not have the module built into the latest version (v4.5). It would be good if we can find a good solution for this in Flowcode 4.5. M...

Hi,
I have same queation. I will be very grateful if anyone can help.
for ex. 16F1827 has an capacitive sensing module with up to 12 input channels. How to configure it in Flowcode?
If someone has used capacitive sensing module please upload some example file.
Thank you!
Best Regards

HELLO Zuki!
thank you!

Hello! I get the following error when I try to compile. When I simulate all is fine, but not when I try to compile. This program will control the PWM according to two ADC signals. I use Integer for measuring variables so they can be both positive and negative. As I can understand, problem is in my I...

OK,
Thank you Steve!
I will try it.
Best Regards